|
Alcohol Fuels: Alcohol can be blended with gasoline for use as transportation fuel. It may be produced from a wide variety of organic feedstock. The common alcohol fuels are methanol and ethanol. Methanol may be produced from coal, natural gas, wood and organic waste. Ethanol is commonly made from agricultural plants, primarily corn, containing sugar.
Alternating Current (AC): An electric current that reverses its direction at regularly recurring intervals, usually 50 or 60 times per second.
Amorphous Silicon: An alloy of silica and hydrogen, with a disordered, noncrystalline internal atomic arrangement, that can be deposited in thin-layers (a few micrometers in thickness) by a number of deposition methods to produce thin-film photovoltaic cells on glass, metal, or plastic substrates.
Annualized Growth Rates: Calculated as follows:
(xn / x1) 1/n ,
where x is the value under consideration and n is the number of periods.
Air-Conditioning & Refrigeration Institute (ARI) - 320, 325, 330: ARI heat pump classifications: 320 refers to a water-source heat pump; 325 refers to a ground water-source heat pump; 330 refers to a ground source closed-loop heat pump.
Availability Factor: A percentage representing the number of hours a generating unit is available to produce power (regardless of the amount of power) in a given period, compared to the number of hours in the period.
Biomass: Organic nonfossil material of biological origin constituting a renewable energy source.
Bioenergy: Useful, renewable energy produced from organic matter, which may either be used directly as a fuel or processed into liquids and gases.
Biofuels: Liquid fuels and blending components produced from biomass (plant) feedstocks, used primarily for transportation.
Biomass gas (Biogas): A medium Btu gas containing methane and carbon dioxide, resulting from the action of microorganisms on organic materials such as a landfill.
Black Liquor (Pulping Liquor): The alkaline spent liquor removed from the digesters in the process of chemically pulping wood. After evaporation, the liquor is burned as a fuel in a recovery furnace that permits the recovery of certain basic chemicals.
Capacity Factor: The ratio of the electrical energy produced by a generating unit for the period of time considered to the electrical energy that could have been produced at continuous full-power operation during the same period.
Capacity, Gross: The full-load continuous rating of a generator, prime mover, or other electric equipment under specified conditions as designated by the manufacturer. It is usually indicated on a nameplate attached to the equipment.
Capacity, Net Summer: See Net Summer Capacity.
Capital Cost: The cost of field development and plant construction and the equipment required for the generation of electricity.
Cast Silicon: Crystalline silicon obtained by pouring pure molten silicon into a vertical mold and adjusting the temperature gradient along the mold volume during cooling to obtain slow, vertically-advancing crystallization of the silicon. The polycrystalline ingot thus formed is composed of large, relatively parallel, interlocking crystals. The cast ingots are sawed into wafers for further fabrication into photovoltaic cells. Cast-silicon wafers and ribbon-silicon sheets fabricated into cells are usually referred to as polycrystalline photovoltaic cells.
Cogeneration: See combined heat and power.
Combined Cycle: An electric generating technology in which electricity is produced from otherwise lost waste heat exiting from one or more gas (combustion) turbines. The exiting heat is routed to a conventional boiler or to a heat recovery steam generator for utilization by a steam turbine in the production of electricity. Such designs increase the efficiency of the electric generating unit.
Combined Heat and Power (CHP) Plant: A plant designed to produce both heat and electricity from a single heat source. Note: This term is being used in place of the term “cogenerator” that was used by EIA in the past. CHP better describes the facilities because some of the plants included do not produce heat and power in a sequential fashion and, as a result, do not meet the legal definition of cogeneration specified in the Public Utility Regulatory Policies Act (PURPA).
Commercial Sector: An energy-consuming sector that consists of service-providing facilities and equipment of: businesses; Federal, State, and local governments; and other private and public organizations, such as religious, social, or fraternal groups. The commercial sector includes institutional living quarters. It also includes sewage treatment facilities. Common uses of energy associated with this sector include space heating, water heating, air conditioning, lighting, refrigeration, cooking, and running a wide variety of other equipment. Note: This sector includes generators that produce electricity and/or useful thermal output primarily to support the activities of the above-mentioned commercial establishments.
Concentrator: A reflective or refractive device that focuses incident insolation onto an area smaller than the reflective or refractive surface, resulting in increased insolation at the point of focus.
Conventional hydroelectric (hydropower) plant: A plant in which all of the power is produced from natural streamflow as regulated by available storage.
Digester Gas: Biogass that is produced using a digester which is an airtight vessel or enclosure in which bacteria decomposes biomass in water to produce biogas.
Direct Current (DC): An electric current that flows in a constant direction. The magnitude of the current does not vary or has a slight variation.
Distributed Generation (Distributed Energy Resources): Refers to electricity provided by small, modular power generators (typically ranging in capacity from a few kilowatts to 50 megawatts) located at or near customer demand.
Electric power sector: An energy-consuming sector that consists of electricity only and combined heat and power(CHP) plants whose primary business is to sell electricity, or electricity and heat, to the public–i.e., North American Industry Classification System 22 plants.
Electric Utility: A corporation, person, agency, authority, or other legal entity or instrumentality aligned with distribution facilities for delivery of electric energy for use primarily by the public. Included are investor-owned electric utilities, municipal and State utilities, Federal electric utilities, and rural electric cooperatives. A few entities that are tariff based and corporately aligned with companies that own distribution facilities are also included.
Note: Due to the issuance of FERC Order 888 that required traditional electric utilities to functionally unbundle their
generation, transmission, and distribution operations, “electric utility” currently has inconsistent interpretations from State to State.
Electric Utility Restructuring: The introduction of competition into at least the generation phase of electricity production, with a corresponding decrease in regulatory control.
Emissions: Anthropogenic releases of gases to the atmosphere. In the context of global climate change, they consist of radiatively important greenhouse gases (e.g., the release of carbon dioxide during fuel combustion).
Energy Crops: Crops grown specifically for their fuel value. These include food crops such as corn and sugarcane, and nonfood crops such as poplar trees and switchgrass. Currently, two energy crops are under development: short - rotation woody crops, which are fast - growing hardwood trees harvested in five to eight years, and herbaceous energy crops, such as perennial grasses, which are harvested annually after taking two to three years to reach full productivity.
Ethanol (also known as Ethyl Alcohol or Grain Alcohol, CH3-CH2OH): A clear, colorless flammable oxygenated hydrocarbon with a boiling point of 173.5 degrees Fahrenheit in the anhydrous state. However it readily forms a binary azetrope with water, with a boiling point of 172.67 degrees Fahrenheit at a composition of 95.57 percent by weight ethanol. It is used in the United States as a gasoline octane enhancer and oxygenate (maximum 10 percent concentration). Ethanol can be used in higher concentrations (E85) in vehicles designed for its use. Ethanol is typically produced chemically from ethylene, or biologically from fermentation of various sugars from carbohydrates found in agricultural crops and cellulosic residues from crops or wood. The lower heating value, equal to 76,000 Btu per gallon, is assumed for estimates in this report.
Evacuated Tube: In a solar thermal collector, an absorber tube, which is contained in an evacuated glass cylinder, through which collector fluids flows.
Flat Plate Pumped: A medium-temperature solar thermal collector that typically consists of a metal frame, glazing, absorbers (usually metal), and insulation and that uses a pump liquid as the heat-transfer medium: predominant use is in water heating applications.
Fuel Cells: One or more cells capable of generating an electrical current by converting the chemical energy of a fuel directly into electrical energy. Fuel cells differ from conventional electrical cells in that the active materials such as fuel and oxygen are not contained within the cell but are supplied from outside.
Fuelwood: Wood and wood products, possibly including coppices, scrubs, branches, etc., bought or gathered, and used by direct combustion.
Generation (Electricity): The process of producing electric energy from other forms of energy; also, the amount of electric energy produced, expressed in watthours (Wh).
Gross Generation: The total amount of electric energy produced by the generating units at a generating station or stations, measured at the generator terminals.
Net Generation: Gross generation less the electric energy consumed at the generating station for station’s use.
Geothermal Energy: As used at electric power plants, hot water or steam extracted from geothermal reservoirs in the Earth’s crust that is supplied to steam turbines at electric power plants that drive generators to produce electricity.
Geothermal Plant: A plant in which a turbine is driven either from hot water or by natural steam that derives its energy from heat found in rocks or fluids at various depths beneath the surface of the earth. The fluids are extracted by drilling and/or pumping.
Giga: One billion.
Green Pricing/Marketing: In the case of renewable electricity, green pricing represents a market solution to the various problems associated with regulatory valuation of the nonmarket benefits of renewables. Green pricing programs allow electricity customers to express their willingness to pay for renewable energy development through direct payments on their monthly utility bills.
Grid: The layout of an electrical distribution system.
Hardwoods: Usually broad-leaved and deciduous trees.
Heat Pump: A year-round heating and air-conditioning system employing a refrigeration cycle. In a refrigeration cycle, a refrigerant is compressed (as a liquid) and expanded (as a vapor) to absorb and reject heat. The heat pump transfers heat to a space to be heated during the winter period and by reversing the operation extracts (absorbs) heat from the same space to be cooled during the summer period. The refrigerant within the heat pump in the heating mode absorbs the heat to be supplied to the space to be heated from an outside medium (air, ground or ground water) and in the cooling mode absorbs heat from the space to be cooled to be rejected to the outside medium.
Heat Pump (Air Source): An air-source heat pump is the most common type of heat pump. The heat pump absorbs heat from the outside air and transfers the heat to the space to be heated in the heating mode. In the cooling mode the heat pump absorbs heat from the space to be cooled and rejects the heat to the outside air. In the heating mode when the outside air approaches 32o F or less, air-source heat pumps loose efficiency and generally require a back-up (resistance) heating system.
Heat Pump (Geothermal): A heat pump in which the refrigerant exchanges heat (in a heat exchanger) with a fluid circulating through an earth connection medium (ground or ground water). The fluid is contained in a variety of loop (pipe) configurations depending on the temperature of the ground and the ground area available. Loops may be installed horizontally or vertically in the ground or submersed in a body of water.
Heat Pump (efficiency): The efficiency of a heat pump, that is, the electrical energy to operate it, is directly related to temperatures between which it operates. Geothermal heat pumps are more efficient than conventional heat pumps or air conditioners that use the outdoor air since the ground or ground water a few feet below the earth’s surface remains relatively constant throughout the year. It is more efficient in the winter to draw heat from the relatively warm ground than from the atmosphere where the air temperature is much colder, and in summer transfer waste heat to the relatively cool ground than to hotter air. Geothermal heat pumps are generally more expensive ($2,000 $5,000) to install than outside air heat pumps. However, depending on the location geothermal heat pumps can reduce energy consumption (operating cost) and correspondingly, emissions by more than 20 percent compared to high efficiency outside air heat pumps. Geothermal heat pumps also use the waste heat from air-conditioning to provide free hot water heating in the summer.
High-Temperature Collector: A solar thermal collector designed to operate at a temperature of 180 degrees Fahrenheit or higher.
Incentives: Subsidies and other Government actions where the Governments’s financial assistance is indirect.
Independent Power Producer (IPP): A corporation, person, agency, authority, or other legal entity or instrumentality that owns or operates facilities for the generation of electricity for use primarily by the public, and that is not an electric utility.
Internal Collector Storage (ICS): A solar thermal collector in which incident solar radiation is absorbed by the storage medium.
Industrial Sector: An energy-consuming sector that consists of all facilities and equipment used for producing, processing, or assembling goods. The industrial sector encompasses the following types of activity: manufacturing (NAICS codes 31-33); agriculture, forestry, and fisheries (NAICS code 11); mining, including oil and gas extraction (NAICS code 21); natural gas transmission (NAICS code 2212); and construction (NAICS code 23). Overall energy use in this sector is largely for process heat and cooling and powering machinery, with lesser amounts used for facility heating, air conditioning, and lighting. Fossil fuels are also used as raw material inputs to manufactured products. Note: This sector includes generators that produce electricity and/or useful thermal output primarily to support the above-mentioned industrial activities.
Kilowatt (kW): One thousand watts of electricity (See Watt).
Kilowatthour (kWh): One thousand watthours.
Landfill Gas: Gas that is generated by decomposition of organic material at landfill disposal sites. Landfill gas is approximately 50 percent methane.
Levelized Cost: The present value of the total cost of building and operating a generating plant over its economic life, converted to equal annual payments. Costs are levelized in real dollars (i.e., adjusted to remove the impact of inflation).
Limited Liability Corporation (LLC): A company that limits the liability of its participants to the assets they commit to the enterprise.
Liquid Collector: A medium-temperature solar thermal collector, employed predominantly in water heating, which uses pumped liquid as the heat-transfer medium.
Low-Temperature Collectors: Metallic or nonmetallic solar thermal collectors that generally operate at temperatures below 110 degrees Fahrenheit and use pumped liquid or air as the heat transfer medium. They usually contain no glazing and no insulation, and they are often made of plastic or rubber, although some are made of metal.
Marginal Cost: The change in cost associated with a unit change in quantity supplied or produced.
Medium-Temperature Collectors: Solar thermal col-lectors designed to operate in the temperature range of 140 degrees to 180 degrees Fahrenheit, but that can also operate at a temperature as low as 110 degrees Fahrenheit. The collector typically consists of a metal frame, metal absorption panels with integral flow channels (attached tubing for liquid collectors or integral ducting for air collectors), and glazing and insulation on the sides and back.
Megawatt (MW): One million watts of electricity (See Watt).
Methane: A colorless, flammable, odorless hydrocarbon gas (CH4) which is the major component of natural gas. It is also an important source of hydrogen in various industrial processes. Methane is a greenhouse gas.
MTBE: Methyl Tertiary Butyl Ether is a fuel oxygenate produced by reacting methanol with isobutylene.
MSW (Municipal Solid Waste): Residential solid waste and some nonhazardous commercial, institutional, and industrial wastes.
Net Metering: Arrangement that permits a facility (using a meter that reads inflows and outflows of electricity) to sell any excess power it generates over its load requirement back to the electrical grid to offset consumption.
Net Photovoltaic Cell Shipment: The difference between photovoltaic cell shipments and photovoltaic cell purchases.
Net Photovoltaic Module Shipment: The difference between photovoltaic module shipments and photovoltaic module purchases.
Net summer capacity: The maximum output, commonly expressed in megawatts (MW), that generating equipment can supply to system load, as demonstrated by a multi-hour test, at the time of summer peak demand (period of May 1 through October 31). This output reflects a reduction in capacity due to electricity use for station service or auxiliaries.
Nonutility Generation: Electric generation by nonutility power producers to supply electric power for industrial, commercial, and military operations, or sales to electric utilities. See Nonutility Power Producer.
Nonutility Power Producer: A corporation, person, agency, authority, or other legal entity or instrumentality that owns electric generating capacity and is not an electric utility. Nonutility power producers include qualifying cogenerators, qualifying small power producers, and other nonutility generators (including independent power producers) without a designated, franchised service area that do not file forms listed in the Code of Federal Regulations, Title 18, Part 141.
Operation and Maintenance (O&M) Cost: Operating expenses are associated with operating a facility (i.e., supervising and engineering expenses). Maintenance expenses are that portion of expenses consisting of labor, materials, and other direct and indirect expenses incurred
for preserving the operating efficiency or physical condition of utility plants that are used for power production, transmission, and distribution of energy.
Other Biomass: This category of biomass energy includes: agricultural byproducts/crops (agricultural byproducts, straw); other biomass gas (digester gas, methane); other biomass liquids (fish oil, liquid acetonitrite, waste, tall oil, waste alcohol); other biomass solids (medical waste, solid byproducts; sludge waste and tires.
Paper Pellets: paper compressed and bound into uniform diameter pellets to be burned in a heating stove.
Parabolic Dish: A high-temperature (above 180 degrees Fahrenheit) solar thermal concentrator, generally bowl-shaped, with two-axis tracking.
Parabolic Trough: A high-temperature (above 180 degrees Fahrenheit) solar thermal concentrator with the capacity for tracking the sun using one axis of rotation.
Passive Solar: A system in which solar energy alone is used for the transfer of thermal energy. Pumps, blowers, or other heat transfer devices that use energy other than solar are not used.
Peak Watt: A manufacturer’s unit indicating the amount of power a photovoltaic cell or module will produce at standard test conditions (normally 1,000 watts per square meter and 25 degrees Celsius).
Peat: Peat consists of partially decomposed plant debris. It is considered an early stage in the development of coal. Peat is distinguished from lignite by the presence of free cellulose and a high moisture content (exceeding 70 percent). The heat content of air-dried peat (about 50 percent moisture) is about 9 million Btu per ton. Most U.S. peat is used as a soil conditioner. The first U.S. electric power plant fueled by peat began operation in Maine in 1990.
Photovoltaic (PV) Cell: An electronic device consisting of layers of semiconductor materials fabricated to form a junction (adjacent layers of materials with different electronic characteristics) and electrical contacts and being capable of converting incident light directly into electricity (direct current).
Photovoltaic (PV) Module: An integrated assembly of interconnected photovoltaic cells designed to deliver a selected level of working voltage and current at its output terminals, packaged for protection against environment degradation, and suited for incorporation in photovoltaic power systems.
Process Heating: The direct process end use in which energy is used to raise the temperature of substances involved in the manufacturing process.
Production Tax Credit (PTC): an inflation - adjusted 1.5 cents per kilowatthour payment for electricity produced using qualifying renewable energy sources.
Public Utility Regulatory Policies Act of 1978 (PURPA): One part of the National Energy Act, PURPA contains measures designed to encourage the conservation of energy, more efficient use of resources, and equitable rates. Principal among these were suggested retail rate reforms and new incentives for production of electricity by cogenerators and users of renewable resources.
Pumped-storage hydroelectric plant: A plant that usually generates electric energy during peak load periods by using water previously pumped into an elevated storage reservoir during off-peak periods when excess generating capacity is available to do so. When additional generating capacity is needed, the water can be released from the reservoir through a conduit to turbine generators located in a power plant at a lower level.
Quadrillion Btu: Equivalent to 10 to the 15th power Btu.
Qualifying Facility (QF): A cogeneration or small power production facility that meets certain ownership, operating, and efficiency criteria established by the Federal Energy Regulatory Commission (FERC) pursuant to the Public Utility Regulatory Policies Act of 1978 (PURPA). (See the Code of Federal Regulations, Title 18, Part 292.)
Renewable Energy Resources: Energy resources that are naturally replenishing but flow-limited. They are virtually inexhaustible in duration but limited in the amount of energy that is available per unit of time. Renewable energy resources include: biomass, hydro, geothermal, solar, wind, ocean thermal, wave action, and tidal action.
Renewable Portfolio Standard (RPS): a mandate requiring that renewable energy provide a certain percentage of total energy generation or consumption.
Residential Sector: An energy-consuming sector that consists of living quarters for private households. Common uses of energy associated with this sector include space heating, water heating, air conditioning, lighting, refrigeration, cooking, and running a variety of other appliances. The residential sector excludes institutional living quarters.
Ribbon Silicon: Single-crystal silicon derived by means of fabricating processes that produce sheets or ribbons of single-crystal silicon. These processes include edge-defined film-fed growth, dendritic web growth, and ribbon-to-ribbon growth.
Roundwood: Wood cut specifically for use as a fuel.
Silicon: A semiconductor material made from silica, purified for photovoltaic applications.
Single Crystal Silicon (Czochralski): An extremely pure form of crystalline silicon produced by the Czochralski method of dipping a single crystal seed into a pool of molten silicon under high vacuum conditions and slowly withdrawing a solidifying single crystal boule rod of silicon. The boule is sawed into thin wafers and fabricated into single-crystal photovoltaic cells.
Sludge: A dense, slushy, liquid-to-semifluid product that accumulates as an end result of an industrial or technological process designed to purify a substance. Industrial sludges are produced from the processing of energy-related raw materials, chemical products, water, mined ores, sewerage, and other natural and man-made products. Sludges can also form from natural processes, such as the run off produced by rain fall, and accumulate on the bottom of bogs, streams, lakes, and tidelands.
Solar Energy: The radiant energy of the sun, which can be converted into other forms of energy, such as heat or electricity.
Solar Thermal Collector: A device designed to receive solar radiation and convert it into thermal energy. Normally, a solar thermal collector includes a frame, glazing, and an absorber, together with the appropriate insulation. The heat collected by the solar thermal collector may be used immediately or stored for later use.
Solar Thermal Collector, Special: An evacuated tube collector or a concentrating (focusing) collector. Special collectors operate in the temperature (low concentration for pool heating) to several hundred degrees Fahrenheit (high concentration for air conditioning and specialized industrial processes).
Spent liquor: The liquid residue left after an industrial process; can be a component of waste materials used as fuel.
Spent Sulfite Liquor: end product of pulp and paper manufacturing processes that contains lignins and has a high moisture content; often re-used in recovery boilers. Similar to black liquor.
Subsidy: Financial assistance granted by the Government to firms and individuals.
System Benefits Charge (SBC): A non-bypassable fee on transmission interconnection; funds are allocated among public purposes, including the development and demonstration of renewable energy technologies.
Tall oil: The oily mixture of rosin acids, fatty acids, and other materials obtained by acid treatment of the alkaline liquors from the digesting (pulping) of pine wood.
Thermosiphon System: A solar collector system for water heating in which circulation of the collection fluid
through the storage loop is provided solely by the temperature and density difference between the hot and cold fluids.
Thin-Film Silicon: a technology in which amorphous or polycrystalline material is used to make photovoltaic (PV) cells.
Transmission System (Electric): An interconnected group of electric transmission lines and associated equipment for moving or transferring electric energy in bulk between points of supply and points at which it is transformed for delivery over the distribution system lines to consumers, or is delivered to other electric systems.
Transportation Sector: An energy-consuming sector that consists of all vehicles whose primary purpose is transporting people and/or goods from one physical location to another. Included are automobiles; trucks; buses; motorcycles; trains, subways, and other rail vehicles; aircraft; and ships, barges, and other waterborne vehicles. Vehicles whose primary purpose is not transportation (e.g., construction cranes and bulldozers, farming vehicles, and warehouse tractors and forklifts) are classified in the sector of their primary use.
Turbine: A machine for generating rotary mechanical power from the energy of a stream of fluid (such as water, steam, or hot gas). Turbines convert the kinetic energy of fluids to mechanical energy through the principles of impulse and reaction, or a mixture of the two.
Useful Thermal Output: The thermal energy made available for use in any industrial or commercial process or used in any heating or cooling application, i.e., total thermal energy made available for processes and applications other than electrical generation.
Watt (Electric): The electrical unit of power. The rate of energy transfer equivalent to 1 ampere of electric
current flowing under a pressure of 1 volt at unity power factor.
Watt (Thermal): A unit of power in the metric system, expressed in terms of energy per second, equal to the work done at a rate of 1 joule per second.
Watthour (Wh): The electrical energy unit of measure equal to 1 watt of power supplied to, or taken from, an electric circuit steadily for 1 hour.
Wind energy: Energy present in wind motion that can be converted to mechanical energy for driving pumps, mills, and electric power generators. Wind pushes against sails, vanes, or blades radiating from a central rotating shaft.
Wind power plant: A group of wind turbines interconnected to a common utility system through a system of transformers, distribution lines, and (usually) one substation. Operation, control, and maintenance functions are often centralized through a network of computerized
monitoring systems, supplemented by visual inspection. This is a term commonly used in the United States. In Europe, it is called a generating station.
Wood/Wood Waste: This category of biomass energy includes: black liquor; wood/wood waste liquids (red liquor, sludge wood, spent sulfite liquor); wood/wood waste solids (peat, paper pellets, railroad ties, utility poles, wood/wood waste).
Wood energy: Wood and wood products used as fuel, including round wood (cord wood), limb wood, wood chips, bark, sawdust, forest residues, charcoal, pulp waste, and spent pulping liquor.
Wood pellets: Sawdust compressed into uniform diameter pellets to be burned in a heating stove.
|
changes that can cut an energy bill more then in half. Many do not realize that simple radiant barrier insulation can reduce a homes energy bill by 40% and this is just something that you put over insulation. Stay comfortable while saving energy and helping the environment. You could potentially turn your air conditoner on to a much cooler setting then you could have afforded in the past with some simple home changes.
